Low Viscosity, polyurethane injection product for soil stabilization

FEATURES
-Apply epoxy coating to manholes in minutes.
-Not a plural component system
-Spincasts mixed epoxy
-Fittings provided that attached directly to Xtreme 70:1
-Air-driven motor
-Includes 35 feet of material hose
-Easy to operate, maintain and clean

High-performance air operated pump best suited for high-volume and high pressure application of water proofing products and protective coatings.  This pump  features 50% less parts than the NXT valve for ease of maintenance and repair.

Key Features:

Exposed, Thermally Isolated Poppets
-Accessible for service

De-Icing Valve
-Reduces main valve icing

Tool Box
-Conveniently mounted on cart
-Store you day-to-day essential tools and parts

Trusted XL Motor
-Sharp, smooth changeovers
-Low pulsation, even with multiple guns
-Removable cover for valve maintenance

Protective Rod Guard
-Prevent any potential pinch-point injuries while pump is in motion
-Keeps debris out of thoat wet cup

Robust Air Controls
-High capacity filter regulator
-Lubricator option for extreme operating conditions

Xtreme Lowers (MaxLife Shown)
-Easy to maintain with quick knockdown
-New packing for better seal
-Available in longer MaxLife

Improved Siphon Hose
-Shorter length for easy cleanup
-Save flush material
-Less material waste

Cart with Wheels
-For portability and easy maneuverability
-Flat-free tires

The PRO 50 Starter is a lightweight, portable mortar mixer priced to get you into the manhole rehabilitation business. It’s perfect for the contractor to test the water without breaking the bank. This system features a 12.5 gallon hopper and runs on a 2 h.p., 110 v, 18 amp motor.

At only 286 lbs. and sitting on 10″ wheels, the PRO50 is easy to handle. Its compact size, 44″x20″x36″, makes it easy to transport by truck or utility trailer. It also features an onboard computer to control spray rate and pumping volume to prevent clogging. Powerful for its size, the PRO 50 compressor and spray gun deliver high-volume output for a thorough and even application.

Parsonpoxy FP+ is a two-component, flexible, high-strength, corrosion-resistant epoxy/urethane hybrid product used for repairing sanitary sewer manhole chimney sections and joints, either interior or exterior.

ADVANTAGE:
-Dries durable, flexible and waterproof
-Nontoxic — 100% solids
-Chemically resistant
-No primer required
-Premeasured kit — no guesswork
-Easy application
-Elongation of 300%

Parsonpoxy SEL-80 is a 100% solids, two-component, high-build epoxy coating designed to be applied over brick, concrete or metal structures. It provides excellent protection and abrasion resistance for concrete and steel sewage structures such as manholes, wet wells, digesters and clarifiers, along with mixer blades, shafts and other steel machinery components in contact with aggressive liquids.

ADVANTAGES
-Contains no flammable solvents or VOCs
-Apply to horizontal or vertical surfaces
-Effective on interior and exterior surfaces
-Apply to new and existing concrete and metal surfaces
-Excellent chemical resistance

GeoLiner® Geopolymer Mortar is a fiber-reinforced product designed to provide excellent corrosion resistance along with higher strengths and lower permeability than typical cementitious linings. This high-performance product can be used for rehabilitation of manholes, wet wells, catch basins, large-diameter pipes and tunnels, storm water culverts and WWTP containment structures. Formulated with over 70% pozzolanic content, GeoLiner® can be considered a true geopolymer.

ADVANTAGES

• Great adhesion and cohesion
• Utilizes natural and recycled materials
• Very low carbon footprint
• Provides high level of corrosion resistance
• Restores structural integrity
• Excellent bond to damp surfaces
• Spincast or spray gun application

Parsonpoxy FS1 is a 100% solids epoxy mastic used to protect new infrastructure and rehabilitate existing, damaged, infrastructure. Best applied using a trowel.

ADVANTAGES
-Non-toxic – 100% solids
-Chemically resistant
-No primer required
-Easy application
-Return manholes to service quickly

RC100 is a low viscosity, high-solids malinated polyester/acrylate hybrid coating system reacting with a blocked catalyst. RC100 is an isocyanate-free system featuring super-fast cure, long pot life, excellent adhesion and great chemical resistance for a premium coating with fast return to service. The system can be used for both decorative and protective applications as it exhibits outdoor durability, chemical resistance, Skydrol resistance and lightfastness as well as high gloss and color retention.

Parson Quick Plug is a hydraulic cement material that is mixed with clean, potable water to produce an extremely rapid-setting plug. It is inserted into prepared areas to stop active leaks under low to moderate pressure. Parson Quick Plug may also be used for repairing cracks in concrete. It is ideal for sealing around pipes and conduits. It is non-corrosive and produces extremely high strengths.

ADVANTAGES
-Simple to use — just add clean, potable water
-Stops leaks in approximately one minute
-Fills holes and cracks in floors and walls
-Excellent freeze-thaw resistance
-Nonmetallic
-High early strengths