MICROcure Flyer

MICROcure TDS

MICROcure Accessories

Comprehensive Classroom – Existing Customers
Refresher Classroom – Existing Customers
Live Training – In the field

VeriCure^® is a breakthrough technology developed to improve the CIPP curing process. Its ability to constantly monitor the temperature throughout the duration of the liner installation helps ensure a 360° cure throughout the length of the host pipe. The result is a fully rehabilitated, leak-free pipe, cured with confidence and verified with data.

Easy to use, the VeriCure optical fiber cable runs along the invert of the host pipe and is activated once the CIPP liner has been inflated and the curing process begins. With the cable plugged into the control box, VeriCure’s CMS software captures and records the thermal temperature, incrementally, along the entire length of the liner. Regardless of existing flow, VeriCure provides highly accurate and localized temperature data; helping ensure every inch of liner is properly cured.

• CMS optical fiber monitors temperature along entire length of CIPP liner

• CMS software verifies the cure and installation

• Achieve full cure in less time

• Reduce labor, equipment and fuel cost

• Comprehensive real-time and historical data

Using the VeriCure® system with the CIPP lining process is simple while improving the quality and completeness of the installation.

1. Feed the CMS cable into the invert of the pipe.
2. Insert and then invert CIPP liner into pipe.
3. Enter project parameters into software.
4. Begin curing.
5. Monitor temperature, run report for customer at completion.

From the most trusted name in trenchless rehabilitation equipment and materials, Quadex^® LLC proudly presents the Quad-Cure CIPP Lining System. Quadex has been delivering proven infrastructure rehabilitation products and equipment for more than 30 years. The Quad-Cure CIPP Lining Trailer is the latest addition to its extensive line-up of industry leading equipment, complementing the Quad-Cure resins and liners, to offer a complete system.

Quad-Cure® Liner Tube is a non-woven, needle punched polyester fiber capable of navigating sweeping bends. The Liner Tube form and seam bond through a uniquely designed thermal welding and/or stitched sewing process, that creates an enhanced liner with superior performance.

3″ and larger

3mm and 4.5mm

• 165 and 330 ft. lengths in stock (+/-)
• Custom lengths available greater than 330 ft.

Ideal for straight piping configurations and open-ended (blind shot) installations. May be used on bends up to 90° with nominal wrinkling. Manufactured transitional liners and custom sizes are also available.

Installation Air Pressure – 7 to 10 psi (may need additional pressure to invert around bends).

Avoid extremes of temperature. Freezing may cause the coating structure to degrade locally, especially areas where the coating is in tension or compression – at bends and edges, and immediately adjacent to seam welds. Recommended storage temperature 40°F – 95°F. Shelf life at this temperature: in excess of 1 year.

Avoid prolonged contact with solvents and chemicals.

Clear, 3-ply laminate tube combining two layers of linear LDPE and a high strength cord grid. Specially engineered to provide high strength and durability in a lightweight material.

4″ and larger

10 mil

• 165 and 330 ft. lengths in stock (+/-)
• Longer lengths available

• Barrier for I/I
• Span across missing pipe
• Ease of inversion
• Restrained carrier packer sleeve for point repairs
• Guide tube

Installation Air Pressure – 5 to 7psi (may need additional pressure to invert around bends).

Avoid extremes of temperature. Freezing may cause the coating structure to degrade locally, especially areas where the coating is in tension or compression – at bends and edges, and immediately adjacent to seam welds. Recommended storage temperature 40°F – 95°F. Shelf life at this temperature: in excess of 1 year.

Avoid prolonged contact with solvents and chemicals.

Liner is a non-woven, needle punched polyester fiber with a 100% continuous polyester filament scrim integrated into the fabric to limit longitudinal stretch. Tube forming and seam bonding are achieved through a specially designed thermal welding and/or stitched sewn process, creating a superior enhanced performance liner.

3″ and larger

3mm and 4.5mm

• 165 and 330 ft. lengths in stock (+/-)
• Longer lengths available

Ideal for straight piping configurations. May be used on sweeping bends up to 45° with slight wrinkling. Manufactured transitional liners and custom sizes are available.

Installation Air Pressure – 5 to 7psi (may need additional pressure to invert around bends).

Avoid extremes of temperature. Freezing may cause the coating structure to degrade locally, especially areas where the coating is in tension or compression – at bends and edges, and immediately adjacent to seam welds. Recommended storage temperature 40°F – 95°F. Shelf life at this temperature: in excess of 1 year.

Avoid prolonged contact with solvents and chemicals.

Non-woven, needle punched PE felt, uniquely bonded to an impermeable PU coating with special stitched seam. Highly flexible, single-layer liner, capable of navigating multiple bends up to 90° and transitions.

2″ and larger

2mm and 4.5mm

• 165 and 330 ft. lengths in stock (+/-)
• Longer lengths available

• Multiple bends up to 90° with minimal wrinkling
• Transitions
• Ease of inversion
• Pull-In-Place

Installation Air Pressure – 5 to 7psi (may need additional pressure to invert around bends).

Avoid extremes of temperature. Freezing may cause the coating structure to degrade locally, especially areas where the coating is in tension or compression – at bends and edges, and immediately adjacent to seam welds. Recommended storage temperature 40°F – 95°F. Shelf life at this temperature: in excess of 1 year.

Avoid prolonged contact with solvents and chemicals.

Non-woven needle punched PE felt liner with an impermeable PVC coating. Specially designed stitched seam and taped overlap joint capable of negotiating bends up to 45° with minimal wrinkling.

3″ to 6″

3mm

• 165 and 330 ft. lengths in stock (+/-)
• Longer lengths available

Bends up to 45° with minor wrinkling. Specialty seam limits stretch.

Installation Air Pressure – 5 to 7psi (may need additional pressure to invert around bends).

Avoid extremes of temperature. Freezing may cause the coating structure to degrade locally, especially areas where the coating is in tension or compression – at bends and edges, and immediately adjacent to seam welds. Recommended storage temperature 40°F – 95°F. Shelf life at this temperature: in excess of 1 year.

Non-woven needle punched PE felt liner with an impermeable PU coating. Specially designed stitched seam and taped overlap joint capable of negotiating bends up to 90° with minimal wrinkling. Capable of changing circumferences up to 4 diameters (4D).

4″ (will stretch up to 6″)
Large sizes available

4.5mm

• 165 and 330 ft. lengths in stock (+/-)
• Longer lengths available

• Multiple bends up to 90°
• Transitions without ridge
• Ease of inversion

Installation Air Pressure – 5 to 7psi (may need additional pressure to invert around bends).

Avoid extremes of temperature. Freezing may cause the coating structure to degrade locally, especially areas where the coating is in tension or compression – at bends and edges, and immediately adjacent to seam welds. Recommended storage temperature 40°F – 95°F. Shelf life at this temperature: in excess of 1 year.