K100 Flex Polyaspartic Coating

K100FLEX is a low viscosity, high-solids aliphatic polyisocyanate hardener and polyaspartic coating system. K100FLEX is a self-leveling system featuring fast cure, excellent adhesion, and high-film build. The system can be used for both decorative and protective applications as it exhibits outdoor durability, chemical resistance, skydrol resistance, and light-fastness as well as high gloss and color retention. The material is applied in single or multiple coats by brush, roller or squeegee to vary thicknesses to a variety of substrates including concrete and metal. It can be applied as a top coat employed within multi-build chip/ quartz seamless coating systems.

K100FLEX provides excellent impact, abrasion, and chemical resistance characteristics. Suitable for high traffic interior or exterior applications, the material is ideal for clear topcoat sealer applications over commercial applications, industrial facilities, swimming pool decks, and parking garages.

2 gallon kit, 10 gallon kit, 100 gallon kit

Mixing Part A with Part B: Mix K100S92 and H92Flex in equal parts (1:1) using a clean, dry working vessel. Use a paddle mixer on slow speed for 2 minutes. Avoid overmixing or creating a vortex that would introduce air. Do not mix below the dew point, which will shorten the pot life. No induction time is required prior to use. If micro-media agents are to be incorporated, they are to be added after thoroughly.

Suggested application thickness is 8 mils or 200 ft per coat, per gallon. Refer to Quadex® tech docs directly for specifics on effective application techniques. Maximum application mil thickness in a single application is 10-12 mils. Material will be dry to the touch 2-3 hours after application, dependent on ambient temperature, slab temperature and humidity. Product may be re-coated within 2-24 hours following application. Light foot traffic is acceptable 12 hours following application and vehicular traffic is acceptable 48 hours after application.

Use MEK or Acetone