E100 is a 100% solids, low viscosity, self-leveling epoxy coating with excellent adhesion to concrete and metal substrates. E100 can be used as a concrete sealer or as a topcoat. E100 can be used in chip and metallic systems and is compatible to K100FLEX.

3 gallon kit, 15 gallon kit, 150 gallon kit

Concrete structures must be cured a minimum of 28 days prior to application. Surfaces to be coated must be free of grease, standing water and any other contaminants that may impede adhesion. Always check the surface for any bond inhibitors prior to application. Any repairs must be addressed prior to application and should be repaired in accordance with ICRI standards. Concrete must have a surface profile of CSP #3. If concrete does not meet a profile of CSP #3 it must be profiled mechanically to meet CSP #3. Repair all cracks and joints prior to coating application. Bare metal substrates must be prepared to a SSPC SP 1 standard.

Note: Maintaining a consistent storage temperature prior to application will maximize working time. Material should be kept in a cool dry place prior to application.

Mixing Part A with Part B: Mix 2 parts E100 to 1 part EZ150. Mix for 3 minutes. No induction time is required prior to use. If micro-media agents are to be incorporated, they are to be added after thoroughly mixing A and B.

Suggested application thickness is 8 mils or 200 ft per coat, per gallon. Refer to Quadex® tech docs directly for specifics on effective application techniques. Maximum application mil thickness in a single application is 10-12 mils. Material will be dry to the touch 4 hours after application, dependent on ambient temperature, slab temperature and humidity. Product may be re-coated within 4-24 hours following application. Light foot traffic is acceptable 12 hours following application and vehicular traffic is acceptable 48 hours after application.

Use MEK or Acetone

K100FLEX is a low viscosity, high-solids aliphatic polyisocyanate hardener and polyaspartic coating system. K100FLEX is a self-leveling system featuring fast cure, excellent adhesion, and high-film build. The system can be used for both decorative and protective applications as it exhibits outdoor durability, chemical resistance, skydrol resistance, and light-fastness as well as high gloss and color retention. The material is applied in single or multiple coats by brush, roller or squeegee to vary thicknesses to a variety of substrates including concrete and metal. It can be applied as a top coat employed within multi-build chip/ quartz seamless coating systems.

K100FLEX provides excellent impact, abrasion, and chemical resistance characteristics. Suitable for high traffic interior or exterior applications, the material is ideal for clear topcoat sealer applications over commercial applications, industrial facilities, swimming pool decks, and parking garages.

2 gallon kit, 10 gallon kit, 100 gallon kit

Mixing Part A with Part B: Mix K100S92 and H92Flex in equal parts (1:1) using a clean, dry working vessel. Use a paddle mixer on slow speed for 2 minutes. Avoid overmixing or creating a vortex that would introduce air. Do not mix below the dew point, which will shorten the pot life. No induction time is required prior to use. If micro-media agents are to be incorporated, they are to be added after thoroughly.

Suggested application thickness is 8 mils or 200 ft per coat, per gallon. Refer to Quadex® tech docs directly for specifics on effective application techniques. Maximum application mil thickness in a single application is 10-12 mils. Material will be dry to the touch 2-3 hours after application, dependent on ambient temperature, slab temperature and humidity. Product may be re-coated within 2-24 hours following application. Light foot traffic is acceptable 12 hours following application and vehicular traffic is acceptable 48 hours after application.

Use MEK or Acetone

SL100 is a 100% penetrating silane sealer. It is formulated to be a clear, breathable, long-lasting, 100% silane, water repellent sealer to achieve the highest depth of penetration.

5 gallon (18.9 L) pails and 55 gallon (208 L) drums

250–400 ft2/gallon (6–10 m2/L)

Typical curing time for SL100 is 4–6 hours at 70°F (21°C) and 50% relative humidity. Cooler temperatures or higher relative humidity can extend the drying time.

Store in unopened containers in a clean, dry area between 35-110°F (2-43°C). Keep from freezing.

18 months when properly stored

Clean equipment with xylene.

Quadex® warrants this product to be free from manufacturing defects and to meet the technical properties, contained on the Technical Data Sheet, if used as directed within shelf life. Satisfactory results depend not only on quality products but also upon many factors beyond our control. The only remedy for the Purchaser for any claim concerning this product, including but not limited to, claims alleging breach of warranty, negligence, strict liability or otherwise, is the replacement of product or refund of the purchase price, at the sole option of Quadex.

Any claims concerning this product must be received in writing within one (1) year from the date of shipment. All further technical advice is based on Quadex’s present knowledge and experience. Quadex assumes no liability for providing such information and advice including the extent to which such information and advice may  relate  to  existing  third party intellectual property rights, especially patent rights, nor shall any legal relationship be created by or arise from the provision of such information and advice. Quadex reserves the right to make any changes according to technological progress or further developments.

The Purchaser must test the product for suitability for the intended application and purpose before proceeding with a full application. Performance of the product described herein should be verified by testing and carried out by qualified experts.

PE-21 is a Polyester Urethane with a simultaneous moisture curing component that provides the most durable, chemical resistant, UV stable coating on the market.

• HVLP
• Pressure Pot
• Airless sprayer

Some materials in this product may cause skin and eye irritation and/or sensitization or other allergic responses upon repeated contact. This product must be handled with extreme care and in strict adherence to good industrial practices. Before using it or any other product referred to in this bulletin, consult the applicable Safety Data Sheets for appropriate handling procedures and protective equipment.

E21 is a high build low VOC epoxy primer designed with superior adhesion to steel, aluminum and concrete. Excellent corrosion resistance and quick flash times.

Use Quadex® S-440 wax and grease remover to clean metal substrate free of grease, dirt and foreign contaminants. Concrete must be a minimum of an SSPC 2.

• HVLP 1.5mm-1.8mm (10psi at cap)
• Pressure Pot
• Airless sprayer

SL100 is a 100% penetrating silane sealer. It is formulated to be a clear, breathable, long-lasting, 100% silane, water repellent sealer to achieve the highest depth of penetration.

5 gallon (18.9 L) pails and 55 gallon (208 L) drums

250–400 ft2/gallon (6–10 m2/L)

Typical curing time for SL100 is 4–6 hours at 70°F (21°C) and 50% relative humidity. Cooler temperatures or higher relative humidity can extend the drying time.

Store in unopened containers in a clean, dry area between 35-110°F (2-43°C). Keep from freezing.

18 months when properly stored

Clean equipment with xylene.

Quadex® warrants this product to be free from manufacturing defects and to meet the technical properties, contained on the Technical Data Sheet, if used as directed within shelf life. Satisfactory results depend not only on quality products but also upon many factors beyond our control. The only remedy for the Purchaser for any claim concerning this product, including but not limited to, claims alleging breach of warranty, negligence, strict liability or otherwise, is the replacement of product or refund of the purchase price, at the sole option of Quadex.

Any claims concerning this product must be received in writing within one (1) year from the date of shipment. All further technical advice is based on Quadex’s present knowledge and experience. Quadex assumes no liability for providing such information and advice including the extent to which such information and advice may  relate  to  existing  third party intellectual property rights, especially patent rights, nor shall any legal relationship be created by or arise from the provision of such information and advice. Quadex reserves the right to make any changes according to technological progress or further developments.

The Purchaser must test the product for suitability for the intended application and purpose before proceeding with a full application. Performance of the product described herein should be verified by testing and carried out by qualified experts.

Quadex L100 Premium Gloss Sealer is a high performing, solvent-based, non-yellowing, low VOC, acrylic concrete sealer for almost all cementitious substrates. This premium sealer is made with the highest quality ingredients from around the globe that produce a nice, thick, durable, decorative concrete sealer with a beautiful high gloss “wet look” finish.

L100 is a proprietary formula utilzing special additives and premium acrylic resins to deliver exceptionally high quality at an affordable price. With great chemical resistance, UV durability, and adhesion, this sealer protects treated surfaces from chipping, flaking, delamination and discoloration from UV light exposure. With VOC regulation’s in many states. L100 is also available in “non-compliant” formula’s where regulations allow.

L100 Premium Gloss Sealer was developed for concrete, stamped concrete, pavers, curbing, stone, and other cementitious substrates. Its main uses are on patios, pool decks, walkways, driveways, and garage floors. For optimal performance, please follow the application process.

Please refer to the Safety Data Sheet (SDS) before using.