
SL100 is a 100% penetrating silane sealer. It is formulated to be a clear, breathable, long-lasting, 100% silane, water repellent sealer to achieve the highest depth of penetration.
SL100 is a 100% penetrating silane sealer. It is formulated to be a clear, breathable, long-lasting, 100% silane, water repellent sealer to achieve the highest depth of penetration.
SL100 is a 100% penetrating silane sealer. It is formulated to be a clear, breathable, long-lasting, 100% silane, water repellent sealer to achieve the highest depth of penetration.
5 gallon (18.9 L) pails and 55 gallon (208 L) drums
250–400 ft2/gallon (6–10 m2/L)
Typical curing time for SL100 is 4–6 hours at 70°F (21°C) and 50% relative humidity. Cooler temperatures or higher relative humidity can extend the drying time.
Store in unopened containers in a clean, dry area between 35-110°F (2-43°C). Keep from freezing.
18 months when properly stored
Clean equipment with xylene.
Quadex® warrants this product to be free from manufacturing defects and to meet the technical properties, contained on the Technical Data Sheet, if used as directed within shelf life. Satisfactory results depend not only on quality products but also upon many factors beyond our control. The only remedy for the Purchaser for any claim concerning this product, including but not limited to, claims alleging breach of warranty, negligence, strict liability or otherwise, is the replacement of product or refund of the purchase price, at the sole option of Quadex.
Any claims concerning this product must be received in writing within one (1) year from the date of shipment. All further technical advice is based on Quadex’s present knowledge and experience. Quadex assumes no liability for providing such information and advice including the extent to which such information and advice may relate to existing third party intellectual property rights, especially patent rights, nor shall any legal relationship be created by or arise from the provision of such information and advice. Quadex reserves the right to make any changes according to technological progress or further developments.
The Purchaser must test the product for suitability for the intended application and purpose before proceeding with a full application. Performance of the product described herein should be verified by testing and carried out by qualified experts.
Quadex® L350 Premium Acrylic Cure is a high performing, solvent-based, non-yellowing, low VOC, acrylic copolymer for curing, hardening, and sealing new or existing concrete.
Quadex® L350 Premium Acrylic Cure is a high performing, solvent-based, non-yellowing, low VOC, acrylic copolymer for curing, hardening, and sealing new or existing concrete. This premium formula is made with the highest quality ingredients from around the globe that produce an impervious, durable film that will retain moisture for freshly placed concrete, ensuring an optimal strength development as the concrete cures. This premium copolymer also doubles as a decorative concrete sealer with a beautiful high gloss “wet look” finish. L350 is a proprietary formula utilzing special additives and premium acrylic resins to deliver exceptionally high quality at an affordable price.
SL100 is a 100% penetrating silane sealer. It is formulated to be a clear, breathable, long-lasting, 100% silane, water-repellent sealer to achieve the highest depth of penetration.
SL100 is a 100% penetrating silane sealer. It is formulated to be a clear, breathable, long-lasting, 100% silane, water repellent sealer to achieve the highest depth of penetration.
5 gallon (18.9 L) pails and 55 gallon (208 L) drums
250–400 ft2/gallon (6–10 m2/L)
Typical curing time for SL100 is 4–6 hours at 70°F (21°C) and 50% relative humidity. Cooler temperatures or higher relative humidity can extend the drying time.
Store in unopened containers in a clean, dry area between 35-110°F (2-43°C). Keep from freezing.
18 months when properly stored
Clean equipment with xylene.
Quadex® warrants this product to be free from manufacturing defects and to meet the technical properties, contained on the Technical Data Sheet, if used as directed within shelf life. Satisfactory results depend not only on quality products but also upon many factors beyond our control. The only remedy for the Purchaser for any claim concerning this product, including but not limited to, claims alleging breach of warranty, negligence, strict liability or otherwise, is the replacement of product or refund of the purchase price, at the sole option of Quadex.
Any claims concerning this product must be received in writing within one (1) year from the date of shipment. All further technical advice is based on Quadex’s present knowledge and experience. Quadex assumes no liability for providing such information and advice including the extent to which such information and advice may relate to existing third party intellectual property rights, especially patent rights, nor shall any legal relationship be created by or arise from the provision of such information and advice. Quadex reserves the right to make any changes according to technological progress or further developments.
The Purchaser must test the product for suitability for the intended application and purpose before proceeding with a full application. Performance of the product described herein should be verified by testing and carried out by qualified experts.
Quadex L100 Premium Gloss Sealer is a high performing, solvent-based, non-yellowing, low VOC, acrylic concrete sealer for almost all cementitious substrates. This premium sealer is made with the highest quality ingredients from around the globe that produce a nice, thick, durable, decorative concrete sealer with a beautiful high gloss “wet look” finish.
Quadex L100 Premium Gloss Sealer is a high performing, solvent-based, non-yellowing, low VOC, acrylic concrete sealer for almost all cementitious substrates. This premium sealer is made with the highest quality ingredients from around the globe that produce a nice, thick, durable, decorative concrete sealer with a beautiful high gloss “wet look” finish.
L100 is a proprietary formula utilzing special additives and premium acrylic resins to deliver exceptionally high quality at an affordable price. With great chemical resistance, UV durability, and adhesion, this sealer protects treated surfaces from chipping, flaking, delamination and discoloration from UV light exposure. With VOC regulation’s in many states. L100 is also available in “non-compliant” formula’s where regulations allow.
L100 Premium Gloss Sealer was developed for concrete, stamped concrete, pavers, curbing, stone, and other cementitious substrates. Its main uses are on patios, pool decks, walkways, driveways, and garage floors. For optimal performance, please follow the application process.
Please refer to the Safety Data Sheet (SDS) before using.
Quadex L100 Matte Finish Sealer is a high performing, solvent-based non-yellowing, low VOC, acrylic concrete sealer with a matte finish for almost all cementitious substrates. This premium sealer is made with the highest quality ingredients from around the globe that produce a nice, thick, durable, decorative concrete sealer with a beautiful matte finish.
Quadex L100 Matte Finish Sealer is a high performing, solvent-based non-yellowing, low VOC, acrylic concrete sealer with a Matte finish for almost all cementitious substrates. This premium sealer is made with the highest quality ingredients from around the globe that produce a nice, thick, durable, decorative concrete sealer with a beautiful matte finish.
Quadex L100 is chosen when a little to no gloss finish is desired. L100’s proprietary formula uses special additives and premium acrylic resins to produce an industry leading quality at an affordable price. With great Chemical resistance, UV durability, and adhesion, this sealer protects treated surfaces from chipping, flaking, delamination and discoloration from UV light exposure. And with VOC content at less than 100 g/L, L100 is available almost anywhere despite increasing VOC regulation’s in many states. Quadex L100 is also available in “non-compliant” formulas if desired.
Quadex® WL250 Water-Based Silicone Sealer is a high performing, low VOC deep penetrating sealer for hydrophobic (water repelling) properties and deep, life extending protection. WL250 is not visible when dry and does not change the appearance of the treated surface. Its proprietary formula uses a special Silane/Siloxane blend to give you a great hydrophobic waterproofing effect on the surface as well as deep penetrating molecules for long-term protection throughout the concrete.
Quadex® WL250 Water-Based Silicone Sealer is a high performing, low VOC deep penetrating sealer for hydrophobic (water repelling) properties and deep, life extending protection. WL250 is not visible when dry and does not change the appearance of the treated surface. Its proprietary formula uses a special Silane/Siloxane blend to give you a great hydrophobic waterproofing effect on the surface as well as deep penetrating molecules for long-term protection throughout the concrete.
Use WL 250 to achieve a natural look while protecting against water damage, salt damage, efflorescence and extending the life of the concrete, brick, mortar, and other cementitious substrates. This premium sealer is made with the highest quality raw materials from around the world.
Quadex® WL250 is engineered for concrete, stamped concrete, pavers, curbing, stone, and other cementitious substrates. Its main uses are on patios, pool decks, walkways, driveways, and large commercial concrete pads. For optimal performance, please follow the application process. Please refer to the Safety Data Sheet (SDS) before using.
Quadex WL240 Water-Based Premium Sealer is a high-performing, non-yellowing, ultra-low VOC, acrylic concrete sealer for almost all cementitious substrates. WL240 is made with industry-leading, proprietary technology unmatched in the market.
Quadex WL240 Water-Based Premium Sealer is a high performing, non- yellowing, ultra-low VOC, acrylic concrete sealer for almost all cementitious substrates. WL240 is made with industry leading, proprietary technology unmatched in the market.
Our technology and manufacturing process allows us to achieve an ultra-low VOC, water-based concrete sealer that outperforms other sealers in its class (water and solvent based) in the following categories: Chemical Resistance, Hot Tire Pickup, Gloss and Gloss Retention, Adhesion, Water/Blush Resistance, and film build characteristics.
Quadex WL240 Water Based Premium Sealer is engineered for concrete, stamped concrete, pavers, curbing, stone, and other cementitious substrates. Its main uses are on patios, pool decks, walkways, driveways, and garage floors. For optimal performance, please follow the application process.
Please refer to the Safety Data Sheet (SDS) before using.