RC100 is a low viscosity, high-solids malinated polyester/acrylate hybrid coating system reacting with a blocked catalyst. RC100 is an isocyanate-free system featuring super-fast cure, long pot life, excellent adhesion and great chemical resistance for a premium coating with fast return to service. The system can be used for both decorative and protective applications as it exhibits outdoor durability, chemical resistance, Skydrol resistance and lightfastness as well as high gloss and color retention.
Product Category: Floor Coatings
RC100 – Rapid Cure Hybrid Coating
RC100 is a low viscosity, high-solids malinated polyester/acrylate hybrid coating system reacting with a blocked catalyst. RC100 is an isocyanate-free system featuring super-fast cure, long pot life, excellent adhesion and great chemical resistance for a premium coating with fast return to service. The system can be used for both decorative and protective applications as it exhibits outdoor durability, chemical resistance, Skydrol resistance and lightfastness as well as high gloss and color retention.
E100 Epoxy Coating System
E100 is a 100% solids, low-viscosity, self-leveling epoxy coating with excellent adhesion to concrete and metal substrates. E100 can be used as a concrete sealer or as a topcoat. E100 can be used in chip and metallic systems and is compatible to K100FLEX.
E100 is a 100% solids, low viscosity, self-leveling epoxy coating with excellent adhesion to concrete and metal substrates. E100 can be used as a concrete sealer or as a topcoat. E100 can be used in chip and metallic systems and is compatible to K100FLEX.
3 gallon kit, 15 gallon kit, 150 gallon kit
Concrete structures must be cured a minimum of 28 days prior to application. Surfaces to be coated must be free of grease, standing water and any other contaminants that may impede adhesion. Always check the surface for any bond inhibitors prior to application. Any repairs must be addressed prior to application and should be repaired in accordance with ICRI standards. Concrete must have a surface profile of CSP #3. If concrete does not meet a profile of CSP #3 it must be profiled mechanically to meet CSP #3. Repair all cracks and joints prior to coating application. Bare metal substrates must be prepared to a SSPC SP 1 standard.
Note: Maintaining a consistent storage temperature prior to application will maximize working time. Material should be kept in a cool dry place prior to application.
Mixing Part A with Part B: Mix 2 parts E100 to 1 part EZ150. Mix for 3 minutes. No induction time is required prior to use. If micro-media agents are to be incorporated, they are to be added after thoroughly mixing A and B.
Suggested application thickness is 8 mils or 200 ft per coat, per gallon. Refer to Quadex® tech docs directly for specifics on effective application techniques. Maximum application mil thickness in a single application is 10-12 mils. Material will be dry to the touch 4 hours after application, dependent on ambient temperature, slab temperature and humidity. Product may be re-coated within 4-24 hours following application. Light foot traffic is acceptable 12 hours following application and vehicular traffic is acceptable 48 hours after application.
Use MEK or Acetone
E100 contains 100% solids epoxy. Do not ingest. If E100 comes in contact with eyes flush immediately with water. Read the container label warning and Safety Data Sheet prior to use.
K100 Flex Polyaspartic Coating
K100FLEX is a low viscosity, high-solids aliphatic polyisocyanate hardener and polyaspartic coating system. K100FLEX is a self-leveling system featuring fast cure, excellent adhesion, and high-film build. The system can be used for both decorative and protective applications as it exhibits outdoor durability, chemical resistance, skydrol resistance, and light-fastness as well as high gloss and color retention.
K100 Flex Polyaspartic Coating
Safety Data Sheets
K100FLEX is a low viscosity, high-solids aliphatic polyisocyanate hardener and polyaspartic coating system. K100FLEX is a self-leveling system featuring fast cure, excellent adhesion, and high-film build. The system can be used for both decorative and protective applications as it exhibits outdoor durability, chemical resistance, skydrol resistance, and light-fastness as well as high gloss and color retention. The material is applied in single or multiple coats by brush, roller or squeegee to vary thicknesses to a variety of substrates including concrete and metal. It can be applied as a top coat employed within multi-build chip/ quartz seamless coating systems.
K100FLEX provides excellent impact, abrasion, and chemical resistance characteristics. Suitable for high traffic interior or exterior applications, the material is ideal for clear topcoat sealer applications over commercial applications, industrial facilities, swimming pool decks, and parking garages.
2 gallon kit, 10 gallon kit, 100 gallon kit
Mixing Part A with Part B: Mix K100S92 and H92Flex in equal parts (1:1) using a clean, dry working vessel. Use a paddle mixer on slow speed for 2 minutes. Avoid overmixing or creating a vortex that would introduce air. Do not mix below the dew point, which will shorten the pot life. No induction time is required prior to use. If micro-media agents are to be incorporated, they are to be added after thoroughly.
Suggested application thickness is 8 mils or 200 ft per coat, per gallon. Refer to Quadex® tech docs directly for specifics on effective application techniques. Maximum application mil thickness in a single application is 10-12 mils. Material will be dry to the touch 2-3 hours after application, dependent on ambient temperature, slab temperature and humidity. Product may be re-coated within 2-24 hours following application. Light foot traffic is acceptable 12 hours following application and vehicular traffic is acceptable 48 hours after application.
Use MEK or Acetone
Polyaspartic aliphatic polyurea products contain chemical ingredients that are considered hazardous. Read the container label warning and Safety Data Sheet prior to use.
PE-21 Polyester Urethane Coating
PE-21 is a Polyester Urethane with a simultaneous moisture curing component that provides the most durable, chemical resistant, UV stable coating on the market.
PE-21 is a Polyester Urethane with a simultaneous moisture curing component that provides the most durable, chemical resistant, UV stable coating on the market.
• HVLP
• Pressure Pot
• Airless sprayer
Some materials in this product may cause skin and eye irritation and/or sensitization or other allergic responses upon repeated contact. This product must be handled with extreme care and in strict adherence to good industrial practices. Before using it or any other product referred to in this bulletin, consult the applicable Safety Data Sheets for appropriate handling procedures and protective equipment.
E21 High-Build Epoxy Primer
E21 is a high-build, low VOC epoxy primer designed with superior adhesion to steel, aluminum and concrete. It has excellent corrosion resistance and quick flash times.
E21 is a high build low VOC epoxy primer designed with superior adhesion to steel, aluminum and concrete. Excellent corrosion resistance and quick flash times.
Use Quadex® S-440 wax and grease remover to clean metal substrate free of grease, dirt and foreign contaminants. Concrete must be a minimum of an SSPC 2.
• HVLP 1.5mm-1.8mm (10psi at cap)
• Pressure Pot
• Airless sprayer
Some materials in this product may cause skin and eye irritation and/or sensitization or other allergic responses upon repeated contact. This product must be handled with extreme care and in strict adherence to good industrial practices. Before using it or any other product referred to in this bulletin, consult the applicable Safety Data Sheets for appropriate handling procedures and protective equipment.