Structure Guard®-FM is a 100% solids epoxy mastic used to protect new infrastructure and to rehabilitate existing, damaged, infrastructure.
Structure Guard®-FM Epoxy Mastic
Structure Guard®-FM Epoxy Mastic
Safety Data Sheets
Description
Structure Guard®-FM is a 100% solids epoxy mastic used to protect new infrastructure and to rehabilitate existing, damaged, infrastructure. Structure Guard-FM is best applied using a trowel.
Packaging
Net Weight — 2.5 lbs (usable material)/cartridge
15 lbs (usable material)/case (6 cartridges)
Yield
Sq. ft. per gallon 250 mils 6.4 sq. ft.
Sq. ft. per 6 cartridge case 250 mils 9.12 sq. ft.
Preparation
Concrete/Brick: Substrate surface must be Hydro Blasted at 5000 psi, removing any loose concrete or other material. Must be free of grease and oil. ALL SURFACES MUST BE DRY, CLEAN AND FREE FROM OIL, GREASE AND OTHER CONTAMINANTS!
Technical Information
Color – Green
Solids – 100% (no solvents)
Volatile Organic Compounds (VOCs) – 0
Thickness – 125 to 250 mils per coat
Number of Components – 2
Cure Time (at 70°F or 21°C)
Re-coat – 2 hours
Water Contact – 4 hours
Final Cure – 24 hours
Re-Coat
Must be abraded with the equivalent of 36 grit sand paper after 24 hrs.
Storage Temp
70°F
Shelf Life
24 months unopened
Pot Life
10 minutes at 70°F (21°C)
Mixing Ratio
2 to 1 in prepackaged cartridge. Use with 600 mil x 300 mil cartridge dispenser. Use only the material that the job requires, leaving virtually no wasted material.
Equipment
Directly applied to substrate from static mixing tip. Use trowel or putty knife to smooth material.
Clean Up
Acetone. REFER TO SAFETY DATA SHEET FOR SAFETY AND HEALTH INFORMATION.
Environmentally Safe
No harmful VOCs or odors. Disposable packaging and minimal waste.
