Non-woven, needle punched PE felt, uniquely bonded to an impermeable PU coating with special stitched seam. Highly flexible, single-layer liner, capable of navigating multiple bends up to 90° and transitions.
Quad-Cure® Liner – Flexiliner 90
Description
Non-woven, needle punched PE felt, uniquely bonded to an impermeable PU coating with special stitched seam. Highly flexible, single-layer liner, capable of navigating multiple bends up to 90° and transitions.
Diameter Range
2″ and larger
Thickness
2mm and 4.5mm
Available Manufacturer Lengths
• 165 and 330 ft. lengths in stock (+/-)
• Longer lengths available
Applications
• Multiple bends up to 90° with minimal wrinkling
• Transitions
• Ease of inversion
• Pull-In-Place
Installation
Installation Air Pressure – 5 to 7psi (may need additional pressure to invert around bends).
Storage and Handling
Avoid extremes of temperature. Freezing may cause the coating structure to degrade locally, especially areas where the coating is in tension or compression – at bends and edges, and immediately adjacent to seam welds. Recommended storage temperature 40°F – 95°F. Shelf life at this temperature: in excess of 1 year.
Chemical Attack
Avoid prolonged contact with solvents and chemicals.
