Low Viscosity, polyurethane injection product for soil stabilization
Product Category: Rehab Equipment
I&I Guard®-SCF Single-Component Foam
I & I Guard® – SCF 200 is a single component, moisture-activated and MDI/TDI blended polyurethane injection grout designed for sealing persistent water leaks caused by large cracks or ill-fitting joints in concrete structures. I & I Guard® – SCF 200 is capable of absorbing up to 12x its weight in water. Foam consistency, 1:1 water ratio. Gel consistency, 10:1 water ratio.
Ideal for manholes, tunnels, pipes, vaults and tanks of all construction materials.
Product packaged by weight based on specific gravity.
• Drum: Net Wt. 484 lbs. (220 kg)
• Pail: Net Wt. 44 lbs. (20 kg)
• Gallon: Net Wt. 8 lbs. (3.6 kg)
• Cartridge: ~10.114 fl. oz. (~ 300 ml)
Store in temperatures ranging from 45°F – 95°F (7°C – 35°C) in a dry environment. Container must remain tightly closed when not in use. Contents are packaged under dry nitrogen to keep moisture out and extend product shelf life.
Recommended for active, high-volume water flow, where large cracks, voids or joints in concrete structures, must be sealed. Effective solution to stabilize moving cracks and joints caused by freeze/thaw conditions and other forms of external pressure.
395 Hi-Boy Grout Pump
FEATURES
-Endurance pump with long-life V-max packings, Chromex rod and hardened stainless-steel cylinder
-QuikAccess Intake valve to easily clean or clear debris
-Consistent pressure control delivers quality spray pattern with minimal fluctuation.
-Easy out pump filter reduces tip clogs and ensures a quality finish.
-Hi-Boy cart with chrome-coated, welded steel construction to withstand the rugged jobsite environment.
-Includes 50′ x 1/4″ material hose and grout injection gun.
P70 Epoxy Spincaster
FEATURES
-Apply epoxy coating to manholes in minutes.
-Not a plural component system
-Spincasts mixed epoxy
-Fittings provided that attached directly to Xtreme 70:1
-Air-driven motor
-Includes 35 feet of material hose
-Easy to operate, maintain and clean
SPN-1000 Mortar Spincaster
With the SPN-1000 Mortar Spincaster you can apply cementitious linings without entering the structure.
FEATURES
-Uniform coating makes brushing or troweling quicker and easier.
-Use material hose to raise and lower.
-Lightweight and balanced
-Easy to clean and maintain
-Air-driven motor (requires a minimum of 65 CFM at 100 PSI)
Prestige 300
The Prestige 300 is a self-contained mixing, pumping and spraying machine. The heart of the 300 is a Yanmar/Lombardini 3-cylinder industrial duty diesel motor. This power plant is indestructible! The diesel motor powers an all-hydraulic drive system, which also includes its own intercooler to keep the hydraulic fluid nice and cool. The combination of a powerful motor and a well-designed hydraulic system means that the Prestige 300 can mix, pump and spray all at the same time.
The hydroelectric controls are linked together by an onboard computer, which greatly simplifies operating the pump, and also provides an LED diagnostic read-out panel to assist with any maintenance issues.
COMPLETE
Ready to go when you uncrate the unit comes complete with a 66 ft. length of hose and a gun kit so you can start working immediately.
CONVENIENCE
The Prestige 300 comes complete with a wired remote so that control from the end of the hose back to the pump is quick and easy.
PORTABILITY
The Prestige 300 features to torsion bar suspension which has both compression and rebound dampening, allowing the unit to glide down the road. The tow package of the prestige 300 is as complete and well designed as the rest of the machine. The tow bar pivots in order to line up properly with the hitch point, whether it’s being towed by an SUV or a dump truck. When towing, the stabilization stand cranks up out of the way. When you arrive at the job site, lower the jack stand and you have a safe and stable work platform. A spare tire is included.
Pro50 Starter Mortar Mixer
The PRO 50 Starter is a lightweight, portable mortar mixer priced to get you into the manhole rehabilitation business. It’s perfect for the contractor to test the water without breaking the bank. This system features a 12.5 gallon hopper and runs on a 2 h.p., 110 v, 18 amp motor.
At only 286 lbs. and sitting on 10″ wheels, the PRO50 is easy to handle. Its compact size, 44″x20″x36″, makes it easy to transport by truck or utility trailer. It also features an onboard computer to control spray rate and pumping volume to prevent clogging. Powerful for its size, the PRO 50 compressor and spray gun deliver high-volume output for a thorough and even application.
Parsonpoxy SEL-80
Parsonpoxy SEL-80 is a 100% solids, two-component, high-build epoxy coating designed to be applied over brick, concrete or metal structures. It provides excellent protection and abrasion resistance for concrete and steel sewage structures such as manholes, wet wells, digesters and clarifiers, along with mixer blades, shafts and other steel machinery components in contact with aggressive liquids.
ADVANTAGES
-Contains no flammable solvents or VOCs
-Apply to horizontal or vertical surfaces
-Effective on interior and exterior surfaces
-Apply to new and existing concrete and metal surfaces
-Excellent chemical resistance
Quad-Cure® CIPP Lining Trailer
From the most trusted name in trenchless rehabilitation equipment and materials, we present the Quad-Cure CIPP Lining trailer from Quadex®. Quadex has been delivering proven infrastructure rehabilitation products and equipment for more than 30 years. The Quad-Cure CIPP Lining Trailer is the latest addition to its extensive line-up of industry leading equipment, complementing the Quad-Cure resins and liners, to offer a complete system.
- Best for small diameter CIPP and lateral lining applications
Quad-Cure® CIPP Lining System Trailer
Case Studies
From the most trusted name in trenchless rehabilitation equipment and materials, Quadex® LLC proudly presents the Quad-Cure CIPP Lining System. Quadex has been delivering proven infrastructure rehabilitation products and equipment for more than 30 years. The Quad-Cure CIPP Lining Trailer is the latest addition to its extensive line-up of industry leading equipment, complementing the Quad-Cure resins and liners, to offer a complete system.
QUANTITY |
DESCRIPTION |
1 |
Aluminum or Steel Frame Trailer with 7,000 lb. Axles |
1 |
High Traction Floors |
1 |
Covered and Insulated Walls and Ceiling |
1 |
13,500 BTU Roof Mounted Dual A/C with Heat Strip |
3 |
Overhead 36” Aluminum Storage Cabinet |
2 |
Control Room LED Ceiling Mounted Lights |
4 |
110V Electrical Receptacle Outlets |
2 |
12V Receptacle/Charger |
1 |
120V Forced Air Heater |
1 |
50 Amp Converter Charger with Shore Plug and Cord |
1 |
LED Ceiling Light |
2 |
LED Ceiling Mounted Lights |
6 |
110V Electrical Receptacle Outlets |
1 |
Solid Wood Butcher Block Countertop |
1 |
5 Drawer Tool Cabinet |
1 |
Rear Back-up Camera |
1 |
LED Directional Arrow Board |
1 |
Roof Mounted Strobes |
1 |
Commercial Grade Cummins® ONAN 7000 Generator |
1 |
VanAir 80 CFM/110 PSI Air Compressor |
1 |
Roof Mounted Solar Charging Package |
1 |
Tread Plate Around Inside Base of Trailer |
1 |
Stainless Steel Wetout Countertop |
1 |
Single Drawer DBL Door Cabinet |
1 |
Thermostatically Controlled Fridge/Freezer |
1 |
Resin Bucket Rack |
1 |
Spring Hinged Reinforced Ramp Door |
1 |
Stereo System |
1 |
High Vis Strobe Kit |
2 |
Rear Mounted LED Flood Lights |
1 |
C02 Sensor |
1 |
Hanging Curtain |
1 |
Shocker Hitch |
1 |
Fire Extinguisher |
1 |
Regulated Air with 5 Drops |
Quadex® OneGun® – Mini
An extremely powerful and portable battery-operated cartridge gun, OneGun-Mini is the perfect solution for applying the Quadex line of dual-component cartridged repair materials.
An extremely powerful and portable battery-operated cartridge gun, OneGun Mini is the perfect solution for applying the Quadex line of dual component repair materials.
I&I Guard®-SCF 200 Single-Component Foam
Moisture activated, single component, hydrophilic polyurethane foam grout designed for sealing persistant leaks in concrete structures.
I & I Guard® – SCF 200 is a single component, moisture-activated and MDI/TDI blended polyurethane injection grout designed for sealing persistent water leaks caused by large cracks or ill-fitting joints in concrete structures. I & I Guard® – SCF 200 is capable of absorbing up to 12x its weight in water. Foam consistency, 1:1 water ratio. Gel consistency, 10:1 water ratio.
Ideal for manholes, tunnels, pipes, vaults and tanks of all construction materials.
Product packaged by weight based on specific gravity.
• Drum: Net Wt. 484 lbs. (220 kg)
• Pail: Net Wt. 44 lbs. (20 kg)
• Gallon: Net Wt. 8 lbs. (3.6 kg)
• Cartridge: ~10.114 fl. oz. (~ 300 ml)
Store in temperatures ranging from 45°F – 95°F (7°C – 35°C) in a dry environment. Container must remain tightly closed when not in use. Contents are packaged under dry nitrogen to keep moisture out and extend product shelf life.
Recommended for active, high-volume water flow, where large cracks, voids or joints in concrete structures, must be sealed. Effective solution to stabilize moving cracks and joints caused by freeze/thaw conditions and other forms of external pressure.