Quad-Cure Liner Tube

Quad-Cure® Liner Tube is a non-woven, needle-punched polyester fiber capable of navigating sweeping bends. The liner tube form and seam bond through a uniquely designed thermal welding and/or stitched sewing process, that creates an enhanced liner with superior performance.

Description

Quad-Cure® Liner Tube is a non-woven, needle punched polyester fiber capable of navigating sweeping bends. The Liner Tube form and seam bond through a uniquely designed thermal welding and/or stitched sewing process, that creates an enhanced liner with superior performance.

Diameter Range

3″ and larger

Thickness

3mm and 4.5mm

Available Manufacturer Lengths

• 165 and 330 ft. lengths in stock (+/-)
• Custom lengths available greater than 330 ft.

Applications

Ideal for straight piping configurations and open-ended (blind shot) installations. May be used on bends up to 90° with nominal wrinkling. Manufactured transitional liners and custom sizes are also available.

Installation

Installation Air Pressure – 7 to 10 psi (may need additional pressure to invert around bends).

Storage and Handling

Avoid extremes of temperature. Freezing may cause the coating structure to degrade locally, especially areas where the coating is in tension or compression – at bends and edges, and immediately adjacent to seam welds. Recommended storage temperature 40°F – 95°F. Shelf life at this temperature: in excess of 1 year.

Chemical Attack

Avoid prolonged contact with solvents and chemicals.

Quad-Cure® Liner – Cal Tube Stitched

Flexible tube designed to provide excellent resistance against tearing and higher temperature resistance for heat-cured installation. For use in open-end liner (blind-shot) and pull-in-place applications. Once pressurized inside of the liner, the flexible tube will press the liner against the host pipe during the curing process.

Quad-Cure® Liner - Cal Tube Stitched

Technical Data Sheets

Description

Flexible tube designed to provide excellent resistance against tearing and higher temperature resistance for heat-cured installation. For use in Open-End liner (Blind-Shot) and Pull-In-Place applications. Once pressurized inside of the liner, the flexible tube will press the liner against the host pipe during the curing process.

Diameter Range

4” and Larger

Available Manufacturer Lengths

• 165 and 330 ft. lengths in stock (+/-)
• Longer lengths available

Applications

• Open-ended (Blind Shot) inverted liner
• Pull-In-Place
• Hot water, steam, or ambient curing
• Translucent tube for placement
• Guide tube

Installation

Installation Air Pressure – 5 to 7psi (may need additional pressure to invert around bends).

Storage and Handling

Avoid extremes of temperature. Freezing may cause the coating structure to degrade locally, especially areas where the coating is in tension or compression – at bends and edges, and immediately adjacent to seam welds. Recommended storage temperature 40°F – 95°F. Shelf life at this temperature: in excess of 1 year.

Chemical Attack

Avoid prolonged contact with solvents and chemicals.

Quad-Cure® Liner – Cal Tube Ultralight

Very flexible, light-weight PE fabric with PVC coating and specially fused with an overlapped, taped joint. For use in open-end liner (blind-shot) and pull-in-place applications. Once pressurized inside of the liner, the flexible tube will press the liner against the host pipe during the curing process.

Vortex Quad-Cure® Liner — Cal Tube Ultralight

Technical Data Sheets

Description

Very flexible, light-weight PE fabric with PVC coating and specially fused with an overlapped, taped joint. For use in Open-End liner (Blind-Shot) and Pull-In-Place applications. Once pressurized inside of the liner, the flexible tube will press the liner against the host pipe during the curing process.

Diameter Range

2″ to 6″

Available Manufacturer Lengths

• 165 and 330 ft. lengths in stock (+/-)
• Longer lengths available

Applications

• Open-ended (Blind Shot) inverted liner
• Pull-In-Place
• Hot water, steam, or ambient curing
• Translucent tube for placement
• Guide tube

Installation

Installation Air Pressure – 5 to 7psi (may need additional pressure to invert around bends).

Storage and Handling

Avoid extremes of temperature. Freezing may cause the coating structure to degrade locally, especially areas where the coating is in tension or compression – at bends and edges, and immediately adjacent to seam welds. Recommended storage temperature 40°F – 95°F. Shelf life at this temperature: in excess of 1 year.

Chemical Attack

Avoid prolonged contact with solvents and chemicals.

Quad-Cure® Liner – Cal Tube HF

Ultra-flexible, light duty PE fabric with PVC coating and a high-frequency welded overlap seam. For use in open-end liner (blind-shot) and pull-in-place applications. Once pressurized inside of the liner, the flexible tube will press the liner against the host pipe during the curing process.

Quad-Cure® Liner - Cal Tube HF

Technical Data Sheets

Description

Ultra-flexible, light duty PE fabric with PVC coating and a High Frequency welded overlap seam. For use in Open-End liner (Blind-Shot) and Pull-In-Place applications. Once pressurized inside of the liner, the flexible tube will press the liner against the host pipe during the curing process.

Diameter Range

2″ to 6″

Available Manufacturer Lengths

• 165 and 330 ft. lengths in stock (+/-)
• Longer lengths available

Applications

• Open-ended (Blind Shot) inverted liner
• Pull-In-Place
• Hot water, steam, or ambient curing
• Translucent tube for placement
• Guide tube

Installation

Installation Air Pressure – 5 to 7psi (may need additional pressure to invert around bends).

Storage and Handling

Avoid extremes of temperature. Freezing may cause the coating structure to degrade locally, especially areas where the coating is in tension or compression – at bends and edges, and immediately adjacent to seam welds. Recommended storage temperature 40°F – 95°F. Shelf life at this temperature: in excess of 1 year.

Chemical Attack

Avoid prolonged contact with solvents and chemicals.

Quad-Cure® Liner – Woven

Woven, circular looped PE, uniquely bonded to a seamless, impermeable PU coating. The Quad-Cure family of woven liners are extremely flexible and ideal in applications where there are diameter changes and/or multiple bends up to 90°. 

Description

Woven, circular looped PE, uniquely bonded to a seamless, impermeable PU coating. This extremely flexible tube is ideal for use in pipes with multiple diameters and/or pipes with multiple bends up to 90°.  The inherent design allows for smooth transitions and minimal wrinkling.

Diameter Range

2″ to 8″

Thickness

4.5mm

Available Manufacturer Lengths

• 165 and 330 ft. lengths in stock (+/-)
• Longer lengths available

Applications

• Multiple bends up to 90° with minimal wrinkling
• Transitions
• Ease of inversion

Installation

Installation Air Pressure – 5 to 7psi (may need additional pressure to invert around bends).

Storage and Handling

Avoid extremes of temperature. Freezing may cause the coating structure to degrade locally, especially areas where the coating is in tension or compression – at bends and edges, and immediately adjacent to seam welds. Recommended storage temperature 40°F – 95°F. Shelf life at this temperature: in excess of 1 year.

Chemical Attack

Avoid prolonged contact with solvents and chemicals.

Quad-Cure® Liner – Preliner

Clear, 3-ply laminate tube combining two layers of linear LDPE and a high strength cord grid. Specially engineered to provide high strength and durability in a lightweight material.

Description

Clear, 3-ply laminate tube combining two layers of linear LDPE and a high strength cord grid. Specially engineered to provide high strength and durability in a lightweight material.

Diameter Range

4″ and larger

Thickness

10 mil

Available Manufacturer Lengths

• 165 and 330 ft. lengths in stock (+/-)
• Longer lengths available

Applications

• Barrier for I/I
• Span across missing pipe
• Ease of inversion
• Restrained carrier packer sleeve for point repairs
• Guide tube

Installation

Installation Air Pressure – 5 to 7psi (may need additional pressure to invert around bends).

Storage and Handling

Avoid extremes of temperature. Freezing may cause the coating structure to degrade locally, especially areas where the coating is in tension or compression – at bends and edges, and immediately adjacent to seam welds. Recommended storage temperature 40°F – 95°F. Shelf life at this temperature: in excess of 1 year.

Chemical Attack

Avoid prolonged contact with solvents and chemicals.

Quad-Cure® Liner – Flexi 4D

Non-woven, needle-punched PE felt liner with an impermeable PU coating. Specially designed stitched seam and taped overlap joint capable of negotiating bends up to 90° with minimal wrinkling. Capable of changing circumferences up to 4 diameters (4D).

Quad-Cure® Liner - Flexi 4D

Technical Data Sheets

Description

Non-woven needle punched PE felt liner with an impermeable PU coating. Specially designed stitched seam and taped overlap joint capable of negotiating bends up to 90° with minimal wrinkling. Capable of changing circumferences up to 4 diameters (4D).

Diameter Range

4″ (will stretch up to 6″)
Large sizes available

Thickness

4.5mm

Available Manufacturer Lengths

• 165 and 330 ft. lengths in stock (+/-)
• Longer lengths available

Applications

• Multiple bends up to 90°
• Transitions without ridge
• Ease of inversion

Installation

Installation Air Pressure – 5 to 7psi (may need additional pressure to invert around bends).

Storage and Handling

Avoid extremes of temperature. Freezing may cause the coating structure to degrade locally, especially areas where the coating is in tension or compression – at bends and edges, and immediately adjacent to seam welds. Recommended storage temperature 40°F – 95°F. Shelf life at this temperature: in excess of 1 year.

Chemical Attack

Avoid prolonged contact with solvents and chemicals.

Quad-Cure® Liner – Flexiliner 45

Non-woven, needle-punched PE felt liner with an impermeable PVC coating. Specially designed stitched seam and taped overlap joint capable of negotiating bends up to 45° with minimal wrinkling.

Description

Non-woven needle punched PE felt liner with an impermeable PVC coating. Specially designed stitched seam and taped overlap joint capable of negotiating bends up to 45° with minimal wrinkling.

Diameter Range

3″ to 6″

Thickness

3mm

Available Manufacturer Lengths

• 165 and 330 ft. lengths in stock (+/-)
• Longer lengths available

Applications

Bends up to 45° with minor wrinkling. Specialty seam limits stretch.

Installation

Installation Air Pressure – 5 to 7psi (may need additional pressure to invert around bends).

Storage and Handling

Avoid extremes of temperature. Freezing may cause the coating structure to degrade locally, especially areas where the coating is in tension or compression – at bends and edges, and immediately adjacent to seam welds. Recommended storage temperature 40°F – 95°F. Shelf life at this temperature: in excess of 1 year.

Chemical Attack

Avoid prolonged contact with solvents and chemicals.

Quad-Cure® Liner – Flexiliner 90

Non-woven, needle punched PE felt, uniquely bonded to an impermeable PU coating with special stitched seam. Highly flexible, single-layer liner, capable of navigating multiple bends up to 90° and transitions.

Quad-Cure® Liner - Flexiliner 90

Technical Data Sheets

Description

Non-woven, needle punched PE felt, uniquely bonded to an impermeable PU coating with special stitched seam. Highly flexible, single-layer liner, capable of navigating multiple bends up to 90° and transitions.

Diameter Range

2″ and larger

Thickness

2mm and 4.5mm

Available Manufacturer Lengths

• 165 and 330 ft. lengths in stock (+/-)
• Longer lengths available

Applications

• Multiple bends up to 90° with minimal wrinkling
• Transitions
• Ease of inversion
• Pull-In-Place

Installation

Installation Air Pressure – 5 to 7psi (may need additional pressure to invert around bends).

Storage and Handling

Avoid extremes of temperature. Freezing may cause the coating structure to degrade locally, especially areas where the coating is in tension or compression – at bends and edges, and immediately adjacent to seam welds. Recommended storage temperature 40°F – 95°F. Shelf life at this temperature: in excess of 1 year.

Chemical Attack

Avoid prolonged contact with solvents and chemicals.

Quad-Cure® Liner Tube Scrim Reinforced

Liner is a non-woven, needle punched polyester fiber with a 100% continuous polyester filament scrim integrated into the fabric to limit longitudinal stretch. Tube forming and seam bonding are achieved through a specially designed thermal welding and/or stitched sewn process, creating a superior enhanced performance liner.

Quad-Cure® Liner Tube Scrim Reinforced

Technical Data Sheets

Description

Liner is a non-woven, needle punched polyester fiber with a 100% continuous polyester filament scrim integrated into the fabric to limit longitudinal stretch. Tube forming and seam bonding are achieved through a specially designed thermal welding and/or stitched sewn process, creating a superior enhanced performance liner.

Diameter Range

3″ and larger

Thickness

3mm and 4.5mm

Available Manufacturer Lengths

• 165 and 330 ft. lengths in stock (+/-)
• Longer lengths available

Applications

Ideal for straight piping configurations. May be used on sweeping bends up to 45° with slight wrinkling. Manufactured transitional liners and custom sizes are available.

Installation

Installation Air Pressure – 5 to 7psi (may need additional pressure to invert around bends).

Storage and Handling

Avoid extremes of temperature. Freezing may cause the coating structure to degrade locally, especially areas where the coating is in tension or compression – at bends and edges, and immediately adjacent to seam welds. Recommended storage temperature 40°F – 95°F. Shelf life at this temperature: in excess of 1 year.

Chemical Attack

Avoid prolonged contact with solvents and chemicals.